The Eklips dressing kit marketed by Brico Dépôt at 129 euros is made of melamine particle boards with a thickness ranging from 16 to 19 mm. This material is the standard for entry-level dressings, including at BUT where a comparable kit is priced at 129.99 euros. The real question is not the price, which is nearly identical from one retailer to another, but the ability to adapt this module to specific spatial and rental constraints.
Installation without drilling: stabilizing a Brico Dépôt dressing in a rental
A modular dressing placed on the floor without wall fixation remains structurally vulnerable to tipping, especially when the load concentrates on the top rail. We recommend two complementary devices that do not damage the walls.
The adhesive anti-tip straps (like industrial Velcro or repositionable fastening tabs) take the pulling force towards the wall without drilling. They can support several dozen kilos in vertical tension and can be removed cleanly at the end of the lease.
The other solution is to wedge the dressing between two perpendicular walls, typically in a niche or recess. The lateral compression prevents any movement. This is the most reliable configuration in a rental.
- Adhesive anti-tip straps fixed at the top of the cabinet, against the wall, without screws or plugs
- Non-slip pads under the posts to prevent sliding on parquet or tiles
- Dense foam wedges between the top of the dressing and the ceiling if height allows, creating a vertical wedging effect
With these three combined elements, the stability of a floor-mounted kit rivals that of a fixed piece of furniture. We observe that most negative feedback on entry-level dressings concerns tipping that could have been avoided with simple wedging.
This type of installation is particularly suitable if you are considering the Brico Dépôt dressing at 129 euros for a rented room or studio where any intervention on the walls is excluded.
Complete kit or individual composition: choice based on available width
Brico Dépôt offers two distinct approaches. The complete dressing kit, ready to assemble, is suitable for standard-width walls. The individual composition allows for adjusting each column, each shelf, and each rail to an atypical space.
The complete kit is cost-effective only if your wall measures exactly the width specified by the manufacturer. As soon as a discrepancy appears (presence of an electrical outlet, radiator, or beveled corner), the kit creates unusable dead space.
In a room of less than ten square meters, we recommend the modular composition. You choose a narrow column, a shelf unit, and a short rail, adjusting each element to the centimeter. The total cost remains close to that of the kit, sometimes slightly higher, but the wall occupancy rate goes from medium to nearly total.
Case of a sloped wall or under a staircase
Converted attics and under-stair spaces have variable heights. A standard kit will be too high on one side and leave a gap on the other. The only coherent solution is to compose the dressing with modules of different heights, placing the lower columns on the sloped side and the higher columns on the flat ceiling side.
Brico Dépôt offers shelves and columns of various heights in its modular range. Assembly takes a bit more time, but the result utilizes every vertical centimeter.
Ventilation and lighting: two angles ignored by competing guides
An open dressing in a bedroom alters air circulation. Mass-stored clothes absorb ambient moisture, which can generate odors and promote mold if the room is poorly ventilated.
Leaving a space of five to ten centimeters between the back of the dressing and the wall allows for minimal air circulation behind the panels. This simple technical detail changes the durability of stored clothes and limits condensation on the wall, especially in older homes.
On the lighting side, an open dressing without dedicated light remains a dark closet. An adhesive LED strip fixed under the top shelf is enough to make each shelf readable. Rechargeable battery models avoid running a cable, which aligns with the no-drilling logic of a rental installation.
Brico Dépôt Drive Pickup: integrating the dressing into a quick project
The Drive pickup within two hours or by appointment offered by Brico Dépôt changes the project logic. A dressing ordered in the morning can be assembled the same evening, without home delivery fees.
This speed has a concrete benefit for tenants moving in. Assembling the dressing on the day of installation allows for immediate organization instead of living with open boxes for several days waiting for a delivery.
The package format (flat melamine panels) fits in most station wagons or multi-purpose vehicles. Check the maximum length of the panels before you go: some columns exceed two meters, which excludes small cars.
Tools needed for assembly
- Screwdriver with a Phillips head and Torx bit, essential for the confirmats
- Level to ensure the columns are plumb on an uneven floor
- Rubber mallet to fit the dowels without splitting the melamine
- Measuring tape and carpenter’s pencil to mark exact positions on the wall
Assembling a complete kit takes between one and two hours for an experienced person. The modular composition requires more time, as each connection between modules must be aligned independently.
The Brico Dépôt dressing at 129 euros is not a high-end piece of furniture. It is a modular system whose performance depends entirely on the quality of the installation and adaptation to the actual space. Careful wedging, thoughtful ventilation, and added lighting transform a basic kit into functional storage that lasts over time.